Lifting & Installation Procedure – Combisafe Safety Net Fan
-
Assemble fan frame using swivel clamps and fit the net as per manufacturer’s instructions.
-
Install and adjust brackets with locking pins; ensure all fixings are secure.
-
Attach webbing slings to marked lifting points; tie a pull rope to the top bar (for retraction only).
-
Lift slowly with crane and position the fan without using the rope for guidance.
-
Fix to slab, remove slings, and open the fan; continue installing in sequence.
Safety Tips & Best Practices
-
Always follow manufacturer guidance and ensure only trained operatives carry out the installation.
-
Inspect all components before lifting—check slings, brackets, clamps, and netting for damage or wear.
-
Use only designated lifting points approved in the Temporary Works design; never lift using the pull rope.
-
Keep clear during lifting operations and use exclusion zones to prevent unauthorised access.
-
Secure all fixings before deployment; ensure the fan is locked open and the pull rope is accessible for retraction.
⚠️ Disclaimer
This lifting and installation method for the Combisafe Safety Net Fan is provided for guidance only.
All operations must strictly follow the site-specific Lift Plan and any approved Temporary Works Design.
Lifting accessories, brackets, and structural fixings must be inspected and confirmed suitable prior to use.
All activities must be supervised by a Competent Person in accordance with LOLER, PUWER, and relevant UK construction standards.